BURMESTER 035

Its uncluttered and pleasing appearance and its elegant simplicity have turned the 035 preamplifier into one of the favourite products of the Classic Line. The Burmester-designed X-Amp amplifier stages are part of the basic configuration of the 035. Most of them operate symmetrically in Class A and are entirely based on DC coupling. This allowed the sound qualities of the preamplifiers in the Reference Line and the Top Line to find their way into the 035.

» Mer om produktet

The 035 preamplifier combines trailblazing innovations with the design and the ergonomics of a preamplifier that will master all requirements of the future. The foremost development goal was to realize the musical features of the bigger brothers 011 and 808MK5,
which are viewed worldwide as the standard for all preamplifiers, in the 035 as well without
any compromises. The X-Amp amplification stages are taken from the 011. They operate
absolutely balanced in the Class A range and moreover are completely DC coupled.
The elaborate volume regulator is created by an R-2R network that has the same impedance at all volume levels and guarantees an extremely good synchronism down to the
lowest volumes, such as cannot be achieved by potentiometers. Encapsulated reed relays
with gold contacts realize this perfectly. Today‘s signal sources such as CD players require
an extremely quick signal processing. A power supply must meet these requirements at
all times and needs to be appropriately dimensioned. The special power supply of the
Pre Amp 035 is also never overtaxed even with dynamic music passages so that the warm
sound, rich in detail, is always retained.
The 035 enthuses right away after just a few beats: It brings together the warm, comforting
sound of the 011 and 808MK5 with easiest control and an aesthetic appearance. Tonally it
is unequaled.
The total architecture of the circuitry of the 035 accommodates the development to more
complex systems with home theater solutions. Thus a surround processor can simply be
connected by a surround loop. All functions of the 035 can be controlled through the optional BurmesterLink system if necessary. The 035 also provides a tone control that can be
switched off if necessary and a balance regulator is available as well. Much is also offered
for the vinyl enthusiast: MM and MC modules are available too.

» Tekniske data

TECHNICAL
SPECIFICATIONS
3 balanced XLR inputs
2 unbalanced inputs
1 balanced home theater thruput
1 balanced XLR output
1 unbalanced output
1 unbalanced tape output
Headphones jack (on the back panel)
2 x 10V DC output for remote on/off of further Burmester components
Burmester link for external control via RS-232 and USB
Dimensions (WxHxD)
483mm x 95mm x 340mm (without plugs)
Weight
approx. 6.7 kg

Del på: Del på Facebook Del på Twitter