ACOUSTIC SIGNATURE TA-2000 NEO
ACOUSTIC SIGNATURE TA-2000 NEO
ACOUSTIC SIGNATURE TA-2000 NEO
Our TA‑2000 NEO undoubtedly plays with the ‘big boys’ – not only because of the immaculate workmanship typical of Acoustic Signature.
The tonearm combines an extraordinarily stiff and at the same time well-damped dual-layer carbon armtube with almost frictionless precision ball bearings and an internal high-quality wiring by Mogami. In short: a tonearm that harmonizes with top range cartridges. Regardless if you decide for the 9 inch or 12 inch version, the Acoustic Signature TA‑2000 NEO guarantees that your turntable’s performance will not remain below its capabilities.
Special features:
Tonearm with dual-layer carbon armtube
Low resonance, rigid tube design
Available as 9″ and 12″ version
Excellent tracking results due to precision miniature ball bearings by SKF
Better rigidity and smooth operation due to stainless steel tonearm axis design
Internal studio-quality copper wiring by MOGAMI
Supplied with external Audioquest 5-pin copper phono cable (RCA)
Counterweight made of brass
Adjustable VTA & azimuth
Anti-skating knob
Rega- and SME-type mounting versions
5-year warranty (with registration)
Absolutely variable
To match the look of your turntable, the TA‑2000 NEO is available in various finishes – including 24-carat gold plating. In addition to the brass counterweight, an add-on weight for heavy cartridges is also included.
SKF precision ball bearings
The TA‑2000 NEO comes with high-precision ball bearings by SKF that provide excellent control for optimal tracking results. For increased rigidity and smoothness, the tonearm axis is made of stainless steel.
A tonearm for every cartridge
An extremely rigid yet well-damped dual-layer carbon armtube effectively minimizes unwanted vibrations. The TA‑2000 NEO offers simple VTA, azimuth and anti-skating adjustment, allowing fine-tuning for optimum cartridge performance.
Thought out down to the last detail
The headshell of the TA‑2000 NEO offers virtually no surface for unwanted resonances.The internal MOGAMI studio-quality copper wiring and the included Audioquest 5‑pin copper phono cable contribute to the TA‑2000 NEO’s top-of-the-line performance.
Tekniske data
Technical data
| Available sizes: | 9″ version, 12″ version |
| Length: | 293 mm (9″ version), 358 mm (12″ version) |
| Effective length: | 239.3 mm (9″ version), 309 mm (12″ version) |
| Mounting distance (from pivot to center of platter): |
222 mm (9″ version), 295.8 mm (12″ version) |
| Total weight: | 545 g (9″ version), 547 g (12″ version) |
| Effective mass: | 9.6 g (9″ version), 12.6 g (12″ version) |
| Tilt angle (depends on cartridge): |
23.9° (9″ version), 12.1° (12″ version) |
| Overhang: | 17.3 mm (9″ version), 13.2 mm (12″ version) |
| Cartridge balance range: | 6 to 16 g |
| Mounting: | Rega style, SME style |
| Armtube: | Dual-layer carbon |
| Signal cable material: | Copper wiring by Mogami |
| Phono cable: | Phono cable by Audioquest |
| Connectors: | 5-pin to RCA/ground connector |
Available finishes
| Tonearm: | Black (anodized, optional: counter weight 24K gold-plated), Silver (anodized), 24K gold-plated |
| Armtube: | Carbon |
Package contents
- TA-2000 NEO tonearm
- Counter weight
- Adjustment template
- Phono cable
- Additional weight
- Base mount
- Screws
- Toolset
- Instruction manual