BURMESTER 089

The Top Line 089 Belt-Drive CD Player combines brand-new developments with distinguished technologies from our Reference Line products. The interplay between the Burmester-invented belt-drive, SRC-function to 96kHz/24bit or 192kHz/24bit with the according conversion, is regarded internationally as benchmark technology. The belt-driven CD Player has the advantage of decoupling the laser from the drive motor. As a result, the readout of the CD is significantly higher, because it is not afflicted with electrical jitter. The beltdrive is located in a solid, low-resonance chamber.

» Mer om produktet

Due to its two digital inputs and selectable volume control, the 089 has an
additional preamplifier-function. The digital inputs allow the connection of
further external sources. These sources can also benefit from the internal, improved
D/A-converter (up to 192kHz/24 bit). Music is reproduced at its utmost
perfection. Like all Burmester components, the D/A converter is designed with
balanced circuit technology. The subsequent filter stages and X-Amp2 output
stages, are fully balanced without distorting capacitors in the signal path. For
the use of the preamplifier function, the 089 is also equipped with an analog
input for the connection of analog sources.
Like the 088 Preamplifier, the 089 CD Player uses X-Amp2 modules for the outputs.
These modules, formely only used in Burmester Reference Line products,
are primarily responsible for the extraordinary sound that has been awarded
with numerous reference titles in the past.
Feature Overview:
· Belt-drive guarantees ideal data sampling
· Drive unit is capsuled in solid, low-resonance chamber
· The special drive unit construction results in warm, full-bodied sound
· Latest D/A-converting technology with selctable sample rate conversion to 96kHz/24bit
or 192kHz/24bit for relaxing high-range reproduction (also for external digital sources)
· Balanced input and output terminals
· 2 digital inputs (S/P DIF standard up to 192kHz) for the connection of further digital
sources: 1x optical LWL, 1x cinch for 75Ohm coaxial cable
· 1 balanced analog input, XLR 3pol., for the connection of an analog source
(e.g. FM Tuner), can be used for cinch via adapter
· Balanced processing of the analog signal from the D/A converter for higher dynamics
· Separation of supply voltage for analog and digital circuit parts minimizes the influence
of digital high frequency on the analog output signal
· Additional filtering of supply voltage for the analog circuit part for an undistorted sound
experience
· Fixed and variable output
· Analog volume control in 60 increments for direct connection to power amps
(preamp-function)
· 1 balanced analog output, XLR 3pol.
· 1 unbalanced analog output, cinch
· 1 unbalanced analog TAPE output, cinch, for analog tape recordings
· Analog outputs are equipped with X-Amp2 output modules, proven and tested in the
Reference Line CD Player 069
· Selectable output amplification of the analog outputs for the adjustment to connected
equipment: fix (for the connection to preamplifiers or integrated amplifiers) or volume
selectable (for the connection to power amplifiers or active loudspeakers)
· 2 digital outputs (S/P DIF standard) for digital recordings: 1x optical LWL, 1x cinch for
75Ohm coaxial cable
· MMI slot for future extensions (inputs and outputs of virtually any kind)
· SETUP-menu for individual adjustment of basic functions:
o Automatic start after readout of CD can be selected
o Output-amplification FIX or VARIABLE
o Serial number can be read out in display if desired
o Information like status of drive unit incl. Play, Pause and Stop can be read
out in display if desired
o Wake-Up volume can be programmed (in VARIABLE)
o Factory-provided settings can be restored at any time
· Brightness of display adjustable in 4 steps, display-off function
· Vibration-isolating feet with carbon fibre clips for ideal resonance decoupling
· Power controling of other Burmester devices, Master/Slave via DC IN/OUT
· BURLINK for external control via RS-232 and USB as standard
· Remote control 005 included

» Tekniske data

Connections:
DIGITAL-Inputs:

1 x optical (TOSLINK)
1 x RCA
DIGITAL-Outputs:

1 x optical (TOSLINK)
1 x RCA
ANALOG-Inputs: 1 x XLR
ANALOG-Outputs: 1 x XLR (balanced), Stereo
1 x RCA (unbalanced), Stereo
1 x RCA (TAPE) (unbalanced),
Stereo with preset volume
Remote IN/OUT for remote controlling of other Burmester-devices
BurLink for external controlling via RS-323 and USB
Dimensions:
Weight: 13 kg

Width / Height / Depth: 483 mm x 114 mm x 335 mm

Del på: Del på Facebook Del på Twitter