;

BURMESTER B10

A whole series of special features sets the Burmester B10 loudspeakers apart from normal compact speakers.

» Mer om produktet

The thickness of the baffle, for example, is as
much as 48mm in places, while the front terminates in a panel of solid, 10mm
thick aluminium. In most speaker designs, the vibrations from the bass units are
transferred to the baffle, which in turn transmits the vibrations to the rest of the
enclosure walls. Our B10 speaker cabinets, on the other hand, feature an unusually
solid front panel in a sandwich construction. The deliberate decision to
dimension both the bass unit and the frequency crossover for extremely rapid
transients in the fundamental range constitutes another special feature and impacts
extremely positively on the sound characteristics. Transient response has
a major influence on a person’s sense of spatiality and perceived transparency
of the overall sound. In this aspect, there simply is no other loudspeaker that
outperforms the B10.
For delicate overtone reproduction, we have perfected the extraordinary annular
highringtweeter principle. The result is a unique tweeter unit with ringshaped
diaphragm, produced exclusively for Burmester. Its sound benefits are
due in no small measure to the fact that the middle and edge of the membrane
are located at a distance of very few millimetres from the driving coil, enabling
them to react in a fraction of a second to any changes in the audio signal.

For adjusting the bass reproduction to the conditions in the room and to the listener’s personal
taste the B10 has an integrated foam cylinder providing mechanical damping to the
vented cabinet and additionally a bass switch.
The following diagram shows the maximum and minimum bass pressure that can be set
using both the foam cylinder and the bass switch in the connection terminals.

Features:
· Low-vibration cabinet walls made of 19mm MDF (medium-density fibreboard) with
additional internal struts
· Baffle in sandwich construction up to 48mm thick. This results in low resonance levels and
high sound neutrality in the fundamental range
· Reflex construction for low bass distortion. Bass-reflex tunnel in the back wall of the
cabinets, can be closed off with the foam cylinder supplied to damp the bass
reproduction to a degree
· Bass notes can be boosted to a degree by means of the switch on the rear terminal box
· Special dimensioning of lower mid-range units and frequency crossovers for unusually
fast fundamental transients (approx. 200Hz to 2kHz)
· 17cm lower mid-range units with strong magnets and special glass-fibre membranes to
maximise efficiency factor and reproduction precision
· Ringtweeter for extremely accurate, stable-level overtone reproduction
· Despite the compact dimensions, suitable for medium-sized rooms (up to 30m²)
· Internal wiring comprises 4mm² pure copper strand for lossless transmission of all signals
· Felt pads for decoupling and surface protection

» Tekniske data

Dimensions (W x H x D): 220 x 390 x 280mm
8.7” x 15.4” x 11”
Weight per speaker: 11.5 kg
25.4 lbs
Frequency response: 50 Hz-24 kHz
Rated power: 80 watts
Efficiency. 2.83V/1m 8 7 d B
Nominal impedance: 4 ohms
Crossover frequencies: 2,300Hz
Bass units: 170mm Ø in bass reflex housing
High-frequency: units Ringtweeter
Finish: French Walnut, Makassar, high-gloss white

Del på: Del på Facebook Del på Twitter