RELOOP TURN2
RELOOP TURN2
Turn 2 tilbyr temposwitch mellom 33/45, meget presist lager, samt rigid og stødig aluminiumsarm med avtagbart headshell. Med Ortofon OM10 pick-up inkludert, jevn DC motor, aluminiumstallerken og et solid plinth med avkoblingsføtter, er denne et utropstegn i prisklassen! I tillegg er designet rent stilfullt og leveres i tre finisher
SMOOTH BELT DRIVE & LOW-NOISE DC MOTOR
The precise belt drive on the TURN2 ensures a consistent platter speed with minimal wow and flutter. The built-in, low-vibration DC motor is extremely quiet meaning the TURN2 can be ideally set up in listening environments or living rooms. The integrated motor control can be conveniently switched between 33 1/3 and 45 RPM using the speed selector switch, which is located underneath the chassis in keeping with the player’s minimal styling.
STATIC BALANCED, STRAIGHT TONE ARM WITH OPTIMAL TRACKING PERFORMANCE
The TURN2 is fitted with a static balanced, straight tone arm, with an angled headshell and Ortofon cartridge that sits perfectly in the groove of the record. The manual tone arm lift allows the needle to be precisely lowered onto the record. The anti-skating mechanism ensures the best possible tracking performance.
CLASSY, MATT SLIMLINE HOUSING WITH HIGH-QUALITY TERMINAL
Alongside the connection for the external DC power supply, the rear of the TURN2 features two gold-plated, corrosion-resistant RCA connections and a separate earth connection to prevent the possibility of ground loops. All cable connections are removable, allowing for easy replacement or later upgrade. The heavy MDF plinth has an extremely slimline design and is available in a matt black, red or white finish. A high-inertia die cast aluminium platter with chrome edging harmoniously rounds off the elegant design of the TURN2.
FEATURES
Belt-driven Hi-Fi turntable
Factory fitted with Ortofon OM10 cartridge
New straight tonearm design with optimal tracking performance
Manual arm lift
Low vibration DC motor
Integrated motor control with Speed-Switch for conveniently selecting two different speeds 33 / 45 rpm
External DC power supply
Die-cast Aluminum Platter with chrome edging
Anti-Skating Wheel-System
Gold-plated, corrosion resistant connections (all cables detachable)
Slim-line wooden Plinth with mat black finish
Convenient power switch at the side bottom
Included Accessories: Turntable Platter, Dust Cover, 2x Dustcover hinges, Balance Counter Weight, PHONO RCA Cable, DC power supply with international plugs, Felt Mat, Instruction Manual, Ortofon OM10 cartridge, headshell
Tekniske data
Turntable Section:
Type: Belt-Driven Analogue Turntable System
Drive: Belt drive
Motor: DC Motor
Turntable Speeds: 2 speeds (33 1/3, 45)
Wow and flutter: 0.2% WRMS
S/N Ratio: >65 dB (a-weight)
Tonearm Section:
Type: Static Balanced Straight Tonearm
Effective Length: 224mm
Overhang: 19mm
Tracking Error Angle: 25°
Tracking Force: 1.5g
Applicable Cartridge Weight: 4~6g
Anti-Skating Range: 0 – 3g
Turntable Platter:
Material: aluminium die-cast
Diameter: 300mm
Weight: 550g
General:
Power supply: DC 12V, 500mA
Power Consumption: 6W
Dimensions: 420 (W) x 340 (D) x 121 (H) mm (incl. Dust cover)
Weight: Approx. 4.6kg
Terminals:
1x PHONO Out (gold-plated)
1x GND Earth Terminal
Included Accessories:
Turntable Platter, Dust Cover, 2x Dustcover hinges, Balance Counter Weight, PHONO RCA Cable, DC power supply with international plugs, Felt Mat, Instruction Manual, Ortofon OM10 cartridge, headshell